Tag Archives: lower back pain

Kidney Belts for Lower Back Pain: Yay or Nay?

One of the most common questions I get is whether kidney belts are useful to reduce back pain particularly in forklift or truck drivers and people handling goods.

It’s a good question.  I often think of the image of the weight lifter with his kidney belt.  They must know something?

To simplify the science, a lot of lower back pain can be contributed to spinal tissue failure from prolonged or recurrent high compression or shear forces through the spine that occur when:

  1. Lifting heavy weights
  2. Lifting lighter weights using poor posture e.g. with arms stretched out in front  (functionally increasing spinal compression and shear forces) or with high repetition.
  3. Sustaining postures that reduce the lumbar curve (such as bending or slouch sitting)
  4. Being exposed to whole body vibration through sitting in a vehicle for more than 3 hours per day.


Is there anyway that we can reduce this spinal loading without changing our handling techniques?

Yes: if you hold your breathe for a few seconds, this raises the pressures in your abdominal cavity which  reduces spinal loading by relaxing the spinal muscles (the back muscles increase spinal loading when they work) (5-7).  However, you can’t hold your breathe forever and this advantage is lost.  So not really a workable solution.

What about kidney belts? Research found that kidney belts can slightly lower spinal muscle contractions (8-11%) and limit the amount of forward bending during lifting and encourage squat lifting, therefore reducing spinal loading in this scenario (6), however,  kidney belts tended to increase spinal muscle contractions in forklift drivers and make them more likely to experience back pain than forklift drivers who didn’t wear them (6,8).


  1. Chaffin DBPark KS (1973). A longitudinal study of low-back pain as associated with occupational weight lifting factors. Am Ind Hyg Assoc J. 34(12):513-25
  2. Freivalds AChaffin DBGarg ALee KS (1984). A dynamic biomechanical evaluation of lifting maximum acceptable loads. J Biomech. 17(4):251-62.
  3. Adams MA, McNally SDChinn H, Dolan P (1994). Posture and the compressive strength of the lumbar spine. J Biom. 27(6):791-791.

  4. Nachemson AL (1981). Disc pressure measurements. Spine. 6(1):93-7.

  5. Arjmand, N.; Shirazi-Adl, A. (2006). Role of intra-abdominal pressure in the unloading and stabilization of the human spine during static lifting tasks. European Spine Journal. 15:1265–1275.
  6. McGill, S. M.; Norman, R. W.; Sharratt, M. T. (1990). The effect of an abdominal belt on trunk muscle activity and intraabdominal pressure during squat lifts. Ergonomics. 33:147-160.
  7. Daggfeldt K, Thorstensson A (1997). The role of intra-abdominal pressure in spinal unloading. J Biomech. 30:1149–1155.
  8. McGill SM, Norman RW, Sharratt MT (1990). The effect of an abdominal belt on trunk muscle activity and intra-abdominal pressure during squat lifts. Ergonomics. 33:147–60.

Lower Back Pain and Spinal Loading

Lower back pain is a very complex problem and may have many causes.  One cause is when spinal tissue failure occurs as a result of high compression forces applied through the spine leading to spinal injuries.  High spinal compression forces may lead to micro fractures in the vertebral endplates, compression fractures of the vertebral bodies and damage to the spinal discs (1-3).

Activities which cause high spinal compression forces include:

  • Lifting heavy weights.
  • Lifting lighter weights in weak postures which increase the functional weight of the object and thus the load on spinal tissues (e.g. lifting from the floor or above shoulder height).
  • Sustained spinal bending postures (with or without a load in the hand).
  • High repetition spinal bending postures (with or without a load in the hand).
  • Exposure to whole body vibration in vehicles that experience vibrational acceleration including shocks between 2-6g (11).


Certain body postures also create higher compression forces through the spine than others.  For example, bending the spine while lifting, increases the pressures on the spinal discs by more than 100%.   Spinal bending combined with twisting increases spinal disc pressures by more than 400%.  On the other hand, when people recline backwards in a chair, even while adopting a slouching posture, spinal disc pressures reduce by 50-80% – a posture most of us adopt when we’re getting tired during extended bouts of sitting.  Sitting up straight in a chair actually creates twice the spinal compression compared with reclining backwards in a chair – something to tell your granny or your teacher when they criticize your reclined slouching posture!


In 1979, it was noted that when heavy lifting was performed while holding one’s breath (for a few seconds), the intra-abdominal pressure was raised, the spinal extensor muscles activity reduced and both led to reduced compression loading on the lumbar spine, reducing the risk for spinal injury.  However, if the heavy lifts extended for longer than a few moments, the breathe was released and the intra-abdominal pressure fell to much lower levels, reducing this spinal support mechanism substantially (5).  This reduction in spinal compression due to raised intra-abdominal pressure was supported by research published in 2003, 2006 and 2010 and showed that the greatest benefit occurred when the body was in flexed (bent) postures (6-8).

The question arises as to how raised intra-abdominal pressure reduces spinal compression and helps to protect the spine from spinal compression failure leading to spinal injury and lower back pain.

Both abdominal and spinal extensor muscle contraction cause an increase in the spinal compression forces.  However, the abdominal muscle contractions (0- 40% MVC) also assist in raising the intra-abdominal pressure, and when doing so, the net forces on the spine result in reduced spinal compression.  In these circumstances it was also found that there was a reduction in the activity of the erector spinae muscles, with a greater reduction in these muscles’ activity corresponding to a greater increase in intra-abdominal pressure (8).

Furthermore, a 2013 published study revealed that chronic lower back pain sufferers who were experiencing a remission from their pain still exhibited lower levels of agonistic abdominal muscle activity and higher levels of antagonistic paraspinal muscle activity when compared to healthy individuals when performing spinal flexion (stooping/bending) with or without handling a load.  This alteration in their abdominal and spinal muscle recruitment activity/ patterns could result in increased spinal loads (not measured in their study) and possibly contribute to the recurrence of lower back pain in individuals where these altered recruitment patterns have become the norm (9).  On the other hand, research published in 2011 showed that activation of the core muscles showed no improvement in spinal stability, casting doubt on the mechanism in which core muscle rehabilitation is used to assist in the treatment of chronic lower back pain (10).



  1. Chaffin D.B.; Park K.S (1973). A longitudinal study of low-back pain as associated with occupational weight lifting factors. Am Ind Hyg Assoc J. 34(12):513-25.
  2. Freivalds A.; Chaffin D.B.; Garg A.; Lee K.S. (1984). A dynamic biomechanical evaluation of lifting maximum acceptable loads.  J Biomech. 17(4):251-62.
  3. Adams M.A.; McNally S.D.; Chinn H.; Dolan P. (1994). Posture and the compressive strength of the lumbar spine. J Biomech. 27(6):791-791.

  4. Nachemson A.L. (1981). Disc pressure measurements. Spine. 6(1):93-7.

  5. Hutton, W. C.; Cyron, B. M.; Stott, J. R.R. (1979). The compressive strength of lumbar vertebrae. J Anatomy. 129(4): 753-758.
  6. Daggfeldt, K.; Thorstensson, A. (2003).  The mechanics of back-extensor torque production about the lumbar spine. J Biomech. 36(6): 815-823.
  7. Arjmand, N.; Shirazi-Adl, A. (2006). Role of intra-abdominal pressure in the unloading and stabilization of the human spine during static lifting tasks. European Spine Journal. 15:1265–1275.
  8. Stokes I.A.; Gardner-Morse M.G.; Henry S.M. (2010). Intra-abdominal pressure and abdominal wall muscular function: Spinal unloading mechanism. Clinical BiomechanicsNov;25(9):859-66.
  9. D’hooge, R.; Hodges, P.; Tsao H.; Hall L.; MacDonald D.; Danneels L. (2013). Altered trunk muscle coordination during rapid trunk flexion in people in remission of recurrent low back pain. J of Electromyograhy and Kinesiology. Feb;23(1):173-81.
  10. Stokes I.A.; Gardner-Morse M.G.; Henry S.M. (2011). Abdominal muscle activation increases lumbar spinal stability: analysis of contributions of different muscle groups. Clinical BiomechanicsOct;26(8):797-803.
  11. Bazrgari, B.; Shirazi-Adl, A.; Kasra, M. (2008). Seated whole body vibrations with high-magnitude accelerations—relative roles of inertia and muscle forces. Journal of Biomechanics. 41:2639-2646.

4 Steps to sit comfortably in your chair

If you’re one of the millions of Covid19 home office workers in the world, you will appreciate being able to sit comfortably for long hours at your desk.

The chair is the centre of your workstation.  Everything pivots around it.  To sit comfortably follow these 4 steps:

1. Elevate Your Chair to the correct Height

The first thing that you need to do is to set the height of your chair correctly.  How do you know if your chair height is correct?  It is not whether your feet touch the ground or not.  If you use this as your guide, you are likely to set your chair too low, which will result in you shrugging your shoulders to reach your desk and your keyboard.  Shrugging your shoulders for long periods at your desk puts you at a high risk of neck pain.  Neck pain is very common among office workers and a low chair position in relation to one’s desk is one of the reasons why that this is so common.

Buy Now: $19.99 PC/Mac

Read my post on 4 monitor positions that cause neck pain.

So, to find the correct height for your chair, lean backwards against your backrest and elevate your chair until you are able to work at your desk and your keyboard with your shoulders relaxed.  If your feet dangle, don’t lower your chair back again, rather get a footrest.  If there is no money for a footrest, use some books or even reams of paper to support your feet.  Don’t rest your feet on your chair base, this will strain your back.  Also, don’t ignore it if your feet don’t firmly touch the ground.  It makes a greater difference than you think to use a support for your feet, even if it’s only a slight elevation that is necessary for you to be comfortable at your desk.

“Using a footrest is important to set your chair height correctly”

2.  Bring Your Chair Closer to Your Desk

You might also need to bring your chair close enough to your desk.  You need to bring your chair a lot closer to your keyboard and desk than you think you do.  If you don’t, you will find yourself leaning forwards away from your backrest, which can lead to lower back pain.

Read my post about the importance of your spinal posture and the s-curve of the spine.  

If the armrests are a problem and preventing you from bringing your chair close enough to your desk because they are fixed, get someone from maintenance to remove them.  If you have adjustable armrests, first try to lower them, but if the correct height of your chair causes them to knock against your desk, then raise them slightly to slide just over your desk.

“Recline your chair backwards to about -8 degrees” by CS Body Health cc. All Rights Reserved. 2016

3. Incline Your Backrest Backwards to -8 Degrees:

Some people believe that if their chair is upright, they are sitting in good posture and sitting correctly.  Good posture for the spine is maintaining the s-curve of the spine while reclined approximately -8 degrees.  

Sitting too upright places higher loads on the spine than if it is reclined backwards.  If you sit too upright, you will fatigue faster.  Think about it, when you are tired from sitting for too long, you scoot your bum forwards in your chair and lean backwards.  You naturally do this to offload the spine and rest.  Recline your chair and set your desk around the reclined position to be comfortable.  

4.  If Your Chair has an Adjustable Backrest

If your chair has an adjustable backrest, you need to make sure that the curve of the backrest is placed in the small of your back.  This is to ensure that the s-curve of your spine is supported while you sit for long periods at your desk to help reduce lower back pain through reducing loads on your spine.

lumbar support
“Correct position of the chair’s lumbar support” by CS Body Health cc. All Rights Reserved. 2016.

So there you have it, 4 easy steps to sit more comfortably.  Any comments or questions?  Please let me know and I’d be happy to help.

Obesity and Lower Back Pain

Lower back pain is a very common ailment affecting a large portion of the population at any given time.  It’s also generally accepted that we are suffering from an obesity epidemic in South Africa and in many other countries across the world.

"A Matched Set" by Tony Alter under licence CC BY 2.0
“A Matched Set” by Tony Alter under licence CC BY 2.0

I have had many patients who have come for treatment report that their doctor has blamed their lower back pain on their weight.  Being overweight is often a touchy subject for people carrying the extra pounds, so I’ve never been very comfortable making those types of associations or discussing weight issues with these patients.  Moreover, I’ve also had so many skinny patients with severe cases of lower back pain that I preferred to focus on the structural causes of the presenting lower back pain in these individuals rather than any weight issues.

Buy Now: $19.99 PC/Mac

Read my post on lower back pain and driving posture

However, is this the correct approach?  Does one’s weight impact on one’s experience of lower back pain and should it really be swept aside like I tend to do out of deference to people’s feelings?  I thought it might be useful to look at the research to see what studies have found, but first of all, we need to define the parameters of our discussion.

What does it mean to be overweight, and what does it mean to be obese?  According to the Obesity Organisation, a body mass index (BMI) of 24.5-29.9 will place you in the overweight category, a BMI of 30-39 will mean that you are obese, and a BMI of 40+ will mean that you are morbidly obese.

How do you go about calculating your BMI?  

To calculate your BMI, divide your body weight (in kilograms) by your height squared (in centimeters).

Bear in mind, however, that if you’re very muscular, pregnant or breast feeding, your BMI will not be a proper indication of your health.

Use this BMI Calculator to easily workout your BMI.

Right, now that you know your BMI and in which bracket you fall, let us return to my original question: Does being overweight or obese have an influence on your lower back pain?

Some researchers did a literature review of all studies performed in relation to body weight and lower back pain up to 2009 (click here to access the article) and found that there was an association between carrying extra weight and a higher incidence of lower back pain.  They also found that obese people (BMI of 30+) had more lower back pain than overweight people (BMI of 25-29).  This shows an increasing correlation between your weight and your experience of lower back pain.  In other words, the more weight that you carry, the greater your risk of experiencing lower back pain.  

A more recent study published in 2015 (click here to access this article) also probed the associations between body weight and the experience of lower back pain.  Unfortunately this study only focused on men, however, they did look at the associations of weight gain and lower back pain over time (decades).  They found that an increasing BMI of overweight and obesity was linked an increased risk of experiencing radiating lower back pain (in other words lower back pain that has pain going into one or more legs).  What was interesting though, was that they found that generalised lower back pain (known in the medical community as non-specific lower back pain) was not linked to weight gain at all.

This implies that not all lower back pain is affected by your weight, which from experience as a clinician, I know to be true.

So, after all of that, what is the ‘take home’?  Basically, if you are carrying extra weight and are either overweight or obese, you are more likely to experience lower back pain.  However, (and logically), not all lower back pain is influenced by weight gain.

What types of lower back pain are influenced by being overweight?  I will explore this in a future post.

reducing back pain associated with picking Up Your Kids

Children.  They’re little bundles of joy and we love to pick them up and cuddle or play with them, but who of you find that since you have kids, you’ve been experiencing an ache in your lower back?

Why is this?  They’re small, we’re big and surely we’re strong enough to move them around anyway we like?

Buy Now: $19.99 PC/Mac

Well, part of the problem lies in the fact that they’re small and we’re big, or, rather tall.  When we go to pick these little people up, it means that we have to bend down quite low, close to the ground to reach them.

Now if you find yourself picking up your little one as in the picture below, you will definitely end up with lower back pain.

poor child lifting technique, lower back pain, lack of lumbar lordosis

“Bending the back when lifting a child from the floor” by CS Body Health cc. All Rights Reserved. 2016

Most of us don’t like bending our knees when we go down quickly to pick something up off from the ground.  Why is this?  Well, it takes more energy to bend your knees than to bend your back, and naturally we avoid using unnecessary energy.

“Bending your knees while keeping the legs together strains the quadriceps muscles” by CS Body Health cc. All Rights Reserved. 2016

However, what people don’t realise, is that if you use your legs differently, you can reduce the effective weight of your child a lot when you lift them for various biomechanical reasons.   In other words, your child will feel lighter and you will get a lot less back pain if you do this:

  1. Open your legs WIDE.  Wide enough so that when you bend your knees slightly, your knees don’t feel strained and you can reach your child.
  2. Pull them as close to your belly button as you can before you pick them up. (MUCH CLOSER THAN IN THE PHOTO)
  3. Pick them up in this posture, and THEN stand up straight.
  4. Compare the feeling in your back to this new way to your old slouching way.  You will feel a considerable difference in the loading on your back.

When they get a bit bigger – get them to stand up on a chair or box and pick them up close to you from a height where you don’t need to bend your knees or your back.

"Bending the knees with the legs wide apart" by CS Body Health cc. All Rights Reserved. 2016
“Bending the knees with the legs wide apart” by CS Body Health cc. All Rights Reserved. 2016

"Good child lifting technique" by CS Body Health cc. All Rights Reserved. 2016
“Good child lifting technique” by CS Body Health cc. All Rights Reserved. 2016

Correcting Your Driving Posture to Reduce Lower Back Pain

People who suffer from lower back pain often find it aggravated by driving, or some people who drive a lot find themselves experiencing lower back pain.

Either way, there are a few things to be aware of regarding your posture in the car that will help both scenarios reduce their lower back pain and improve their driving experience.

Buy Now: $19.99 PC/Mac

  1.  You need to maintain your lumbar curve in your car seat.

poor driving posture, lower back pain, loss of lumbar lordosis
“Poor slouching driving posture. Loss of lumbar curve”by CS Body Health cc. All Rights Reserved. 2016

Good driving posture, driving ergonomics, lower back pain
“Good driving posture. Lumbar lordosis maintained and supported by backrest” by CS Body Health cc. All Rights Reserved. 2016

Vertebral Column by Unknown and is licenced in the Public Domain
Vertebral Column by Unknown and is licenced in the Public Domain

Your lumbar curve is there to help reduce the loading on your spine.  When you slouch, you increase the pressure on your spinal discs and increase your risk of developing a spinal disc problem that may result in lower back pain.  The backrest of your chair is specially shaped to help maintain your curve.  To gain the benefit of your backrest, ensure that your buttocks are positioned right back against the backrest and that you are leaning backwards into it.

2.  In order to sit properly while you drive and maintain your lumbar curve, you need to position your legs at the correct distance from the pedals to prevent tight hamstrings on stretch from flattening your lumbar curve (read my post on tight hamstrings and lower back pain).

Your hamstrings attach to the bottom of your pelvis and go on stretch when you straighten your knee.  If you have tight hamstrings, when you straighten your knees to reach/press down on your car pedals, the stretch in your hamstrings will result in your pelvis being rotated backwards and your lumbar curve flattening, increasing the pressure on your spinal discs and increasing your risk of developing lower back pain.

In order to determine the correct distance of your car seat to the pedals, place one hand in your lower back and feel the curve of your lower spine, then move your seat forwards and back until you can comfortably reach the pedals while still maintaining your lower/lumbar spinal curve.

Driving Ergonomics
“Optimum chair pedal distance” by CS Body Health cc. All Rights Reserved. 2016

3.  Incline your car seat’s backrest to -8 degrees to reduce the loading on your lumbar spine and reduce spinal fatigue.

There is more loading on your spine when your backrest is upright than when it is reclined backwards.  You instinctively know this, and when you are tired from sitting upright for too long, you will intuitively move your buttocks forwards on the chair seat and lean backwards to take the strain off your spine.  Thus, positioning your car seat too upright will cause fatigue of your back and increase your risk of developing lower back pain if you are driving for long periods of time.

Too upright driving posture
“Driving posture too upright” by CS Body Health cc. All Rights Reserved. 2016

4.  Elevate/lower your chair so that your hips are 90 degrees or less. If your hip angle is too sharp, this will also increase your risk of slouching in your chair, which in turn will lead to increase pressure on your spinal discs and increase your risk of developing lower back pain.  If your seat does not allow you to sit high enough, help yourself by sitting on a small cushion.

5.  Move the steering wheel up/down/forwards and back until you find a comfortable distance from yourself to the steering wheel.  Your elbows should be slightly bent.  This will prevent your shoulders from fatiguing, which when it occurs, will also increase your spinal loading and spinal fatigue when driving and increase your risk of developing lower back pain or aggravating your current pain.

Driving ergonomics
“Steering wheel positioned too far from driver” by CS Body Health cc. All Rights Reserved. 2016

6.  Stretch your hamstrings (read my post on how to stretch your hamstrings if you have lower back pain) if they are tight to help yourself maintain good spinal posture when you drive.

Is Your Computer Monitor Positioned Too Far Away from You?

Neck and lower back pain are such common complaints that we all know someone (if it’s not ourselves) who has experienced at least one of these complaints.  There are many causes for neck or lower back pain.  These can include different types of injuries, disease processes, genetic predispositions, and most importantly and commonly of all, our posture.  Our posture at work and our posture at home and at play.

Our work posture is getting more and more attention, especially since the advances in technology have relegated most of us to work behind a computer for long hours each day.  There are a host of things to consider in our work environment that can negatively affect our posture and cause our neck or lower back pain.

Buy Now: $19.99 PC/Mac

Part of my job is going around performing office ergonomics for people.  One of the most common things I hear is people blaming their chair for their neck or lower back pain.  Most often, however, this is not correct and the real culprit is the monitor and where it has been positioned on the desk.  Luckily, this is a much cheaper and easier solution to the problem.

Your poor monitor position (read my post on 4 poor monitor positions that cause neck pain) is definitely one of the first places to look if you suffer from neck or lower back pain and you think your work posture is to blame.  There are a number of factors to consider in relation to your monitor position, but one very important and neglected element is the correct monitor distance that your monitor is positioned away from you while you work.

If your monitor is positioned too far away from you, you will find yourself leaning forwards in order to see your screen better, creating all sorts of problems in your spine (especially in your neck and lower back) and over activating your shoulder muscles, all leading you down the path of aches and pains.

Monitor Positioned too far
Image by US Navy under Public Domain

So what is the correct distance that you should place your monitor?

Generally, your monitor should be positioned a lot closer to yourself than you think it should.  And if you don’t believe me, ask yourself why you keep leaning forwards when you work.

How do you determine the correct distance that you should position your monitor at?  I call it the “Frankenstein” test.

  • Firstly, position your chair as close to your desk as possible while your arms and wrists are still able to comfortably work on your keyboard and be supported with an elbow angle of 90-120 degrees.  (In order to get close enough to your desk, you might need to adjust your armrests.  Generally I find that most armrests get in the way of the desk when you want to come closer, so one solution is to raise your armrest so that it just slides onto the surface of your desk, allowing you to bring your chair closer.  If you are unlucky enough not to have adjustable armrests and your armrests are really stopping you from bringing your chair sufficiently forwards, I recommend getting your building maintenance to remove them.  Use your desk for your arm support instead).
  • Then, lean backwards against your backrest and replicate Frankenstein’s outstretched arms – where your fingertips end, that is where your screen should be.

Closer than you think?  Give it a try and remember to keep leaning back against your chair’s backrest.  Your backrest is there to help keep you in good posture while you work.  A combination of those two factors (leaning back in your chair and having your monitor at the correct distance away from you) will go a long way to reduce your neck or lower back pain associated with poor working posture.

How to Strengthen Your Abs When You Have Lower Back Pain

One of the worst things about lower back pain is that it stops you doing a lot of your normal activities, sports or exercises.  From experience, I’ve watched lower back pain reduce some very active people into couch potatoes due to their lower back pain preventing them from following their normal sporting routines.  These individuals often struggle to find other ways to keep fit until their lower back pain settles.

A definite exercise no-no for lower back pain is sit ups (read my post on sit ups and lower back pain), or some form of them.  Since core exercises are an integral part of any training program, many people must ask how they can exercise their abdominal muscles while they’re suffering from lower back pain and until their lower back pain settles?

Enter: The Plank.

The plank is one of my favourite exercises.  It’s easy to perform at home and it will give you a good overall work out.  The plank is a lot harder than it looks.

In addition to working your abs, the plank is also a very good exercise for protecting your shoulders against rotator cuff injuries.  It accomplishes this by working your shoulder stabilisers while simultaneously working your abs.  The plank has another added benefit of strengthening your spinal extensor muscles at the same time as well.  It’s an excellent overall core strengthening exercise and should routinely be a part of any training programme.


The Plank exercise, spinal strengthening exercise, abdominal strengthening exercise
Image by Chief Warrant Officer Donnie Brzuska) under Public Domain

When Performing the plank, there are a few things to keep in mind:

  1. Position your feet hip width apart and keep your knees straight and off the floor.
  2. Keep your arms beneath your shoulders and your forearms parallel to each other if you want to work your shoulder stabilisers as well.  Ensure that your upper trapezius muscles stay relaxed (in other words, make sure that your shoulders stay away from the ears during your exercise).
  3. Most importantly, keep your spine straight.  That means that you mustn’t collapse in the lower back.  Your lower back shouldn’t hang like a hammock.  In order to keep your lower back straight, you will need to work your core muscles very hard.  In order to accomplish this, you will need to contract your stomach muscles in the area just below your belly button.  When they contract, they support your spine and prevent too much sagging from occurring in the lower back.
  4. The last part of creating a good plank posture is to ensure that you keep your neck in line with your body.  In order make sure that you’re doing this, don’t look up or down and keep your chin in the neutral position.
  5. Now, hold this position for as long as possible, but at a count that you can repeat at least 5 times.  A good first goal is to try start holding the plank for 15 seconds.  Slowly increase your count over time as you get stronger.
  6. Lastly, it’s important to remember to breathe.  Make sure you breathe in and out while you hold the plank.  It will make it a bit harder but you will be stronger in the long run.



McGill S. (2010).  Core Training: Evidence Translating to Better Performance and Injury Prevention.  Strength and Conditioning Journal, 32 (3), 33-46.

How Overdoing Situps Can Cause Lower Back Pain

A ‘6-pack’ – the ultimate fit and healthy look!  One of the most common ways to go about getting your awesome abs is to perform loads of sit ups.  This must be one of the most common exercises performed in the gym, and judging by the photo below, in the armed forces as well (read my post on why your abs are important Part 1).

Image by the United States Navy and under Public Domain
Image by the United States Navy and under Public Domain

Most people are very careful about how they perform their sit ups to avoid straining their neck.  If your abdominal muscles are weak, it’s not uncommon to assist your sit up by using your momentum, which then leads you to pull on your neck which may end up with you experiencing some neck stiffness or even neck pain.  However, neck pain is not the only possible side effect from too many sit ups.  Have sit up enthusiasts considered that too many sit ups may also be placing them at risk of developing lower back pain?

How’s that you ask? Lower back pain?  Well, it’s like this:  Your body is a complex setup of biomechanical levers.  One of the most important levers is your spine.  Sit ups work the front part of your spine, pulling it forwards.  Counteracting this movement are the spinal extensor muscles.  Are you working them as well?  Are the forces acting on your spine balanced? (Read my post on how lower back pain works Part 1)

spinal lever
Image by CS Body Health cc. All Rights Reserved. 2016.










Do you know where your spinal extensor muscles are?  If you refer to the image below, you can see how long these muscles are and how far they extend along the length of the spine.  Are you performing any spinal extensor muscle exercises in the gym?  Do you know how?

"Longissimus muscle" modified by Uwe Gille under Public Domain
“Longissimus muscle” modified by Uwe Gille under Public Domain

If the muscles acting around your spine are unbalanced and your abs/ ‘6 pack’ is over worked in relation to the spinal extensor muscles, this may cause a constant slumping/slouching affect on your spine.  Too much bending of your spine will cause an increase in the compressive and shearing forces through your spine and especially on your spinal discs.  This may lead to premature wear and tear on these spinal discs (spinal cushions), which are in and of themselves weak in resisting bending and turning forces of the spine, too much of which may lead to lower back pain.  Some research puts the incidence of lower back pain due to injuries of the spinal disc at 65% of all incidence of lower back pain.

Furthermore, performing sit ups as a strengthening exercise for the abs/’6 Pack’ shows a lack of understanding for the real function of the rectus abdominus (click here to read more).  Sit ups are therefore not really functional and are also a high risk exercise for developing lower back pain.   What then would be a better exercise to strengthen your abs/ ‘6 Pack’/ Rectus abdominus functionally?  And would there be a way to simultaneously exercise the spinal extensor muscles and ensure balance of your spinal lever?  The answer is a resounding yes.  Read my post on using the plank as an exercise for more information.

Feel free to leave a question or comment.  I would love to hear from you.



McGill S. (2010).  Core Training: Evidence Translating to Better Performance and Injury Prevention.  Strength and Conditioning Journal, 32 (3), 33-46.

How Does Lower Back Pain Work? Part I

Lower back pain is so common that 8 out of 10 us will experience it at some point in our lives.  Any person who has experienced lower back pain can testify to how debilitating lower back pain is and how much it can negatively impact on your daily life, making common gestures like picking up a tissue off the floor, nearly impossible (read my post on how to strengthen your abs when you have lower back pain).  Not only that, suffering from lower back pain is likely to make driving extremely difficult, if not even more painful (click here to read more about driving posture to reduce lower back pain).  Sitting for long periods at the office or even trying to continue with your normal sport or recreational activities are also negatively impacted when lower back pain comes to call.  All in all, one of the least desirable ailments (read my post on how picking up your children badly can cause lower back pain).

How then does lower back pain work?  Understanding something is the first step in learning to deal with it better and hopefully to help find a way to reduce it’s impact in our lives.

Broadly speaking, your lower back pain will either be mechanical in nature or inflammatory (read about inflammatory lower back pain), or a combination of these.

lower back pain
Image by LadyofHats Mariana Ruiz Villarreal under Public Domain

When your lower back pain is mechanical in nature, this means that it relates to your biomechanics and to your musculoskeletal function.  In other words, it’s how your bones, joints, muscles, nerves, blood vessels and discs are affected by your movements, postures and your rest, to either cause you lower back pain or relieve your lower back pain.

As some of you would know, often when you have lower back pain, some postures and movements are hell and others keep you sane and able to function.  

It’s important to take note when this is the case.  Some people suffering from lower back pain tend to take no notice of what aggravates or eases their lower back pain and they are missing out on very important information in helping to understand and treat their problem correctly and swiftly.

When your lower back pain is due to a mechanical cause, any movement such as sitting/rising/walking/bending/arching backwards/straightening your knee etc. will either increase, decrease or maintain the intensity of your lower back pain.  This is because the mechanical forces created by these movements will have increased, decreased or remained constant on parts of your body tissues such as your spinal discs, facet joints, muscles or nerves.

In addition, you need to understand that different structures in the body are affected by different movements and postures and the forces that they apply.  They are also affected by the type of damage that has occurred and how this causes the affected body tissue to respond to different mechanical forces.

Spinal discs for example are generally aggravated by bending and twisting and can be eased by arching backwards (in certain circumstances, in other circumstances the opposite is true – hence it’s important to see your OMT specialised Physio for assistance since they are especially trained to know these differences and much much more).  On the other hand, generally speaking, your facet joints are aggravated by arching backwards but eased by bending and twisting.  Thus, it’s really important to take note of which movements ease, aggravate or maintain your lower back pain.  This information will help your OMT Physio get to the root of your problem faster.

Next time I will discuss chemical causes of lower back pain.  Any comments?  Please feel free to post them, I would love to hear from you.